Workshop List

Make a memory of a life time for you and/or your children! Have fun learning something that is
exciting, educational, and something that most people never get to see or do, cast metal, pewter
sculptures. Students will taught how Don Norris sculptures his sculptures using wax and only an
Exacto knife. There will not be time to sculpt anything during this class. Most sculptures take
days to weeks to sculpt and finish. However, you will have a thorough understanding of how so
that you can begin sculpting at home. Students will also be taught how mold sculptures. We will
pour a small mold so that you will have the knowledge and experience to make your own molds
at home. The different kinds of mold rubbers available will be taught, but you will be amazed
that you can use very available silicone rubber available on Amazon.com that with the
techniques that you will be taught, can be used to cast pewter at 650 degrees Fahrenheit. This
mold rubber is 12 times cheaper than the only mold rubber than is sold for casting metal into.
Students will be taught what metals can be called “pewter” and the laws governing the use of
pewter. We will discuss metals, how they are mined, what alloys are, and the lead-free pewter
that we use. Students will cast their own pewter hummingbirds and flower. Each hummingbird
has a ring on it between the wings for hanging as an ornament. Each participant will cast and
keep two hummingbirds and a flower. One as an ornament and one that the beak can be placed
into the flower to make a beautiful sculpture! The pewter that we cast is lead free “American
Fine” pewter. Participants will “pour” this pewter directly in to solid rubber molds. After a few
minutes to allow them to freeze, students will remove their pewter sculptures. After cooling the
sculptures students will be taught how to cut the sprues off, grind and clean up the sculptures.

Come play with us in a quick & fun class as we make our easy rings. You will learn how to make a simple ring using pre-made setting from start to finish! Learn how to size your ring band, solder your joints use a hammer, and set a premade bezel walking away with a finished project! This class is great for beginners and will give you a taste of soldering while being able to make your own wonderful simple soldered rings. Supplies are included, we will be using sterling silver, semi-precious stones, and cubic zirconia.

Reader glasses are recommended

IF THE TIME AND DATE OF THE CLASS YOU WANT TO TAKE IS FILLED
PLEASE EMAIL US AT: chicoslittleparadise@gmail.com
We will either see if we can make room or put you on a waitlist incase another student can't make it.
No Refunds for classes

Yes, you can make rings!
In this class, you will be guided through the process of determining the length of metal needed to
produce a particular ring size including for a ring that will be textured after soldering. Using various
styles of silver wire, you will create three different rings in the same size, to be worn as a set. As time
allows, you will add a small cabochon in a pre-made setting to one of the rings. All steps will be carefully
demonstrated and explained by an experienced and patient teacher.
When you leave class, you will not only have successfully made your first rings—but you will also take
with you a comprehensive handout, with fully illustrated step-by-step instructions to help you get
started in your home studio.
If the time and date of the class you want to take is unavailable, please email the teacher, Vilina Hutter, at
studiominerock@gmail.com. We will either make room or put you on a waitlist in case another student
can’t make it.
Please, no requests for refunds less than five days before the show, due to the planning needed for travel
and supplies.
NOTE: We provide all the tools and equipment for use in the class, and discounted tools will be available
for purchase if desired, delivered to your home address after the show.

Come join us in learning a skill that has been around for ages. This classic beauty never goes out of style. We will be teaching you the original knotting used for pearls, that we now use for all different beads. We will be making one bracelet, using sterling silver findings, silk cord, and your choice in beads. May not finish the whole bracelet in class, but you will have all the skills and knowledge to finish at home. Feel free to bring in your own jewelry that has broken, or has stretched out. We will not fix them in the class but we can show you what needs to be done and offer different suggestions.





IF THE TIME AND DATE OF THE CLASS YOU WANT TO TAKE IS FILLED, "Out of Stock" PLEASE EMAIL US AT:

chicoslittleparadise@gmail.com

We will either see if we can make room or put you on a waitlist incase another student can't make it.

No Refunds for classes

Lets play with Resin today! We will be using both UV Resin and Epoxy (two part) Resin. We have lots of very fun molds to use and metal pendants to make one-of-a-kind jewelry and/or wall decors. Learn the do's and don't, and clean up process. Be ready to be creative with ends options to make fun jewelry and/or wall decors. Some projects will be mailed back since there is a 24-72 time it needs to cure.



IF THE TIME AND DATE OF THE CLASS YOU WANT TO TAKE IS FILLED, "Out of Stock" PLEASE EMAIL US AT:

Jewelry@chicoslittleparadise.com

We will either see if we can make room or put you on a waitlist incase another student can't make it. No Refunds for classes, due to travels & supplies.

Join us in learning different designs of earrings. This class is great for those that have never soldered, need a refresher in soldering, or you just love earrings! The techniques are simple but the designs never go out of style, and have been my favorite for many many years. We will be using sterling silver, Pre-made settings and cubic zirconia.

IF THE TIME AND DATE OF THE CLASS YOU WANT TO TAKE IS FILLED PLEASE EMAIL US AT:
chicoslittleparadise@gmail.com
We will either see if we can make room or put you on a waitlist incase another student can't make it.
No refunds for Tucson Classes.

Learn to hammer texture metal, solder, and set a calibrated faceted stone, as you create this beautiful
silver pendant.
Silver soldering is a multi-step process, but under the guidance of an experienced and patient teacher,
you will learn every step as we all create the pendant shown in the illustration—no experience
necessary!
Skills covered in this class include creating a granule, soldering, setting the faceted gem, and polishing
and finishing.
Gem availability may vary—or you can provide your own calibrated 5 mm gem. Cost of the kit with all
the components will be $95, including an 18 inch silver chain.
When you leave class, you will not only have successfully soldered your first piece of wearable art—but
you will also take with you a comprehensive handout, with fully illustrated step-by-step instructions to
help you get started in your home studio.
If the time and date of the class you want to take is unavailable, please email the teacher at
studiominerock@gmail.com. We will either make room or put you on a waitlist in case another student
can’t make it.
Please, no requests for refunds less than five days before the show, due to the planning needed for
travel and supplies.
NOTE: We provide all the tools and equipment for use in the class, and discounted tools will be available
for purchase if desired, delivered to your home address after the show.

Students will taught how to select the correct bezel “wire” and to make a Fine Silver
Bezel to fit a cabochon perfectly every time faster and easier than any other method.
You will learn to make a perfect fitting bezel quickly and professionally in 60 seconds or
less with a little practice. The first time make take four minutes. It is a method that Don
Norris developed 50 years ago, and too his dismay Silversmiths are still using slow and
difficult techniques. With this technique students will be able to make a bezel for stones
in five minutes or less with a perfect shape and fit. Students will then solder the bezel to
a Sterling Silver sheet, make and attach the best bail for pendants. You will, also, learn
how to do the simplest, but the most difficult solder joint used in Silversmithing,
soldering on a bail onto a pendant. Many different bails will be taught. You will learn
that simple does not equate to easy, and complicated is not the most difficult and the
trick to profitable pieces is to make complicated designs quick and easy. You will learn
how to work quickly and use easy techniques to making your projects. Students will also
learn how to polish Sterling Silver jewelry with a Dremel Tool or flex shaft. If you wish to
sell at craft shows or art shows this class and project is a must do for you! If just want to
learn and make a great pendant for yourself you will have fun, and learn how to easily
make more projects at home. Students may bring in their own cabochon stone to use
for the class project no large than 12mm x 18mm in size.

Sawing can be very hard and frustrating, but I can show you the tricks to make it easy and fun! I talk about the different tools and materials to use and what works best. Depending on your skills you will complete one or two different designs, or go for a more advanced piece to complete.

Also if you set stones this is a great class to learn how to saw away the extra sheet metal around your stone! I highly recommend this class if you are taking one of our stone setting classes.


Reader glasses are recommended


IF THE TIME AND DATE OF THE CLASS YOU WANT TO TAKE IS FILLED
PLEASE EMAIL US AT: chicoslittleparadise@gmail.com
We will either see if we can make room or put you on a waitlist incase another student can't make it.
No Refunds for classes

Students will taught how to correctly choose the right size of ring for a finger. Each
student will make 4 stack rings to learn sizing rings, the basics of silver soldering and
polishing. Students can choose to solder a Sterling Silver charm from over hundred
different charms cast by the instructor to solder onto two Sterling Silver rings. They also
learn how to correctly solder pre-notched Sterling Silver heads onto other two rings.
How to set 5mm stones into the heads will be taught before polishing. Students make as
many copper stack rings as time permits for more practice soldering. If you wish to sell
at craft shows or art shows this class and project is a must do for you! These rings are
one of many projects that Don Norris teaches that fall in the category of Sterling Silver
projects that artists can make 50 of them in one day and easily sell them for $30.00 to
$50.00 each, making $20.00 to $40.00 each, or more profit on each one. If just want to
learn and make a great pendant for yourself you will have fun, and learn how to easily
make more projects at home.

Some stones just are not worth spending an hour or more wrapping them to make a
pendant. Students will taught how to quickly wrap almost any stone in 30 to 60 seconds
to make a wire wrapped pendant using Rock Wraps, a finding created and copyrighted
by Don Norris. They are an elegant and quick way to wrap a stone without hiding the
stone under all the wire, Students will be given permission to make and use the
copyrighted “Rock Wrap” for all your stones in the future. You will learn to make them
using 18- and 20-gauge Sterling Silver round wire. Even though this is not a soldering
class you will learn to solder the Rock Wraps after learning how to bend them, shape
them, and solder them in just two places. Of course, you will use hard Silver Solder. You,
also, will be taught how to make a hundred or more in one day. The Rock Wrap can
wrap any cabochon, crystal, small crystal cluster, rough stone, found objects, steam
punk objects, and especially tumbled stones in less than 60 seconds. They are also
perfect to wrap arrowheads and dichroic glass pieces. You will solder and use two to
make two pendants in this class. You may, also, make as many copper Rock Wraps as
time permits. You will be taught to tumble polish Sterling Silver and copper. We will
have hundreds of cabochons, dichroic glass, and tumbled stones to choose from. You
may bring in your own stones if you wish.

Choose a sample from my bead works and I will give you the pattern, kit, and explain it in detail. Materials in kits depend on kit price. Special Notes or requirements: Please, bring work mat, needles (10-12), and favorite thread (6lb and 8lb depend on chosen projects)

No experience needed! Learn to create unusual gold and silver jewelry in this introduction to the
ancient Korean art of keum-boo, where 24 kt gold foil is fused to fine silver and patinated to create a
unique effect.
Keum-boo is a simple but precise process and the instructor for this class will walk you carefully and
thoroughly through the process step-by-step, as we all create earrings that are your interpretation of
those shown in the illustration. Each step will be carefully demonstrated and explained, but you will be
able to bring your own design ideas to the project.
When you leave class, you will not only have successfully created your first piece of wearable art—but
you will also take with you a comprehensive handout, with fully illustrated step-by-step instructions to
help you get started in your home studio.
If the time and date of the class you want to take is unavailable, please email the teacher at
studiominerock@gmail.com. We will either make room or put you on a waitlist in case another student
can’t make it.
Please, no requests for refunds less than five days before the show, due to the planning needed for travel
and supplies.
NOTE: We provide all the tools and equipment for use in the class, and tools will be available for
purchase if desired, delivered to your home address after the show.

Have you ever wondered how people wrap stones? In this class you will learn how to wrap one yourself! We will be going over the different wires, stones, and tools to use. In class we will be using plated, 22 gauge, square and half round wire. We will have stones available to pick from in class. Feel free to bring your own, but you might not be able to use it in class because it may be too difficult to use. You will be walking away with a finished project ready to be worn or the knowledge to finish at home.



IF THE TIME AND DATE OF THE CLASS YOU WANT TO TAKE IS FILLED, "Out of Stock" PLEASE EMAIL US AT:

chicoslittleparadise@gmail.com

We will either see if we can make room or put you on a waitlist incase another student can't make it.

No Refunds for classes, due to travels & supplies.

Ever wonder how they make these simple beautiful pieces? In this class you can make your own CZ pendant. We will show you how to solder these gorgeous piece step by step. Learn heat control, setting cz in pre-made settings, and best tools for the job. We will be using sterling silver for our projects.


IF THE TIME AND DATE OF THE CLASS YOU WANT TO TAKE IS FILLED, "Out of Stock" PLEASE EMAIL US AT:chicoslittleparadise@gmail.com We will either see if we can make room or put you on a waitlist in case another student can't make it.
No Refunds for classes

Choose a sample from my bead works and I will give you the pattern, kit, and explain it in detail. Materials in kits depend on kit price. Special Notes or requirements: Please, bring work mat, needles (10-12), and favorite thread (6lb and 8lb depend on chosen projects)

Unleash your inner silversmith and make your own collection of stunning hoop earrings! In this fun and
immersive workshop, you'll transform simple silver wire into beautiful, one-of-a-kind earrings that will
elevate any outfit.
An expert instructor will guide you through all the essential techniques, from measuring and cutting wire
to forming perfect hoops and soldering secure closures. You'll learn how to create classic hoops in various
sizes, then explore exciting variations like multiples, mixed sizes, textured hoops, twisted hoops, and even
hoops embellished with delicate charms or beads.
This class is perfect for beginners and experienced makers alike! All the materials you'll need are
included, along with the essential tools and a safe and supportive learning environment. By the end of the
workshop, you'll walk away with one or maybe two pairs of fabulous handmade hoop earrings and the
skills to create many more! So come, unleash your creativity and add a touch of silver sparkle to your
style!
When you leave class, you will not only have successfully created silver hoop earrings—but you will also
take with you a comprehensive handout, with fully illustrated step-by-step instructions to help you get
started in your home studio, including detailed directions to make a variety of styles of hoop earrings.
If the time and date of the class you want to take is unavailable, please email the teacher at
studiominerock@gmail.com. We will either make room or put you on a waitlist in case another student
can’t make it.
Please, no requests for refunds less than five days before the show, due to the planning needed for travel
and supplies.
NOTE: We provide all the tools and equipment for use in the class, and tools will be available for
purchase if desired, delivered to your home address after the show.

Each participant will cast one Fine Silver (.999 Silver) pendant using a method that Don Norris perfect 40 years ago using a bundle of pine needles and pour one half ounce of Fine Silver into the “hay stack” of pine needles. The pine needles will act as a mold, molding the Silver into a one-of-a-kind pendant. No two will be the same. They will then search through the needles and find their pine needle casting. Students will be able to cast another one until they get one, they love. After casting, the instructor will solder a Sterling Silver bail onto the casting, making it into a beautiful pendant. Each pendant will be cleaned and tumbled polished. The soldering techniques used were developed by Don Norris over 50 years ago and will be explained by the instructor. The tumble polishing technique will also be taught to the students.

Students will taught how to quickly design, bend and solder using hard silver solder two
pendants and polishing. Students will use their own designs and construct them with 18
gauge round wire. They will require many solder joints for each pendant providing many
opportunities for soldering. The easiest and best way to solder a bail onto wire pendants
will be taught. They also learn how to correctly solder easy set Sterling Silver heads
onto their pendants for extra profits and fun. How to set 5mm stones into the heads will
be taught before polishing. Each student will make two Sterling Silver pendants during
the class and make as many copper pendants as time permits for more practice
soldering. You will, also, learn how to do the simplest, but the most difficult solder joint
used in Silversmithing, soldering on a bail onto a pendant. Many different bails will be
taught. You will learn that simple does not equate to easy, and complicated is not the
most difficult and the trick to profitable pieces is to make complicated designs quick and
easy. You will learn how to work quickly and use easy techniques to making your
projects. If you wish to sell at craft shows or art shows this class and project is a must do
for you! These are one of many projects that Don Norris teaches that fall in the category
of Sterling Silver projects that artists can make 50 of them in one day and easily sell
them for $30.00 to $50.00 each, making $20.00 to $40.00 each, or more profit on each
one. If just want to learn and make a great pendant for yourself you will have fun, and
learn how to easily make more projects at home.

Wanted to know how to set stones or cabochon stones? This is a great beginner class on how to solder pre-made bezels to set the stones and CZ with Tube settings. We will be soldering the bezels onto a pre-cut shape of Sterling Silver metal. Your own design is at play on what you want your pendant to look like with several things to choose from. Once we have our pieces all soldered, we will be learning how to set the stones and what to look for to make them last! We will be focused on how to set stones in this class, but no Soldering skills are needed.
But for more in-depth knowledge for soldering check out my Intro. to Soldering Class offered on Saturday's, Monday, and Thursday.

IF THE TIME AND DATE OF THE CLASS YOU WANT TO TAKE IS FILLED PLEASE EMAIL US AT:
chicoslittleparadise@gmail.com
We will either see if we can make room or put you on a waitlist incase another student can't make it.
No refunds for classes.

This class has a little bit of everything involved: Soldering, Sawing, Sweat Soldering, Polishing and Pre-made Settings. You will learn how to saw out a design to solder on top of the backing piece. Once sawed out, we will polish and then solder with CZ or stone to add (Selection of CZ and Stones to pick from in class). We will be using sterling silver for this project. This class will give you lots of different techniques into one piece and later use in lots of different projects.



IF THE TIME AND DATE OF THE CLASS YOU WANT TO TAKE IS FILLED PLEASE EMAIL US AT:

Jewelry@chicoslittleparadise.com

We will either see if we can make room or put you on a waitlist in case another student can't make it.

No refunds for classes.

Choose a sample from my bead works and I will give you the pattern, kit, and explain it in detail. Materials in kits depend on kit price. Special Notes or requirements: Please, bring work mat, needles (10-12), and favorite thread (6lb and 8lb depend on chosen projects)

Choose a sample from my bead works and I will give you the pattern, kit, and explain it in detail. Materials in kits depend on kit price. Special Notes or requirements: Please, bring work mat, needles (10-12), and favorite thread (6lb and 8lb depend on chosen projects)

Unleash your inner silversmith and make your own collection of stunning hoop earrings! In this fun and
immersive workshop, you'll transform simple silver wire into beautiful, one-of-a-kind earrings that will
elevate any outfit.
An expert instructor will guide you through all the essential techniques, from measuring and cutting wire
to forming perfect hoops and soldering secure closures. You'll learn how to create classic hoops in various
sizes, then explore exciting variations like multiples, mixed sizes, textured hoops, twisted hoops, and even
hoops embellished with delicate charms or beads.
This class is perfect for beginners and experienced makers alike! All the materials you'll need are
included, along with the essential tools and a safe and supportive learning environment. By the end of the
workshop, you'll walk away with one or maybe two pairs of fabulous handmade hoop earrings and the
skills to create many more! So come, unleash your creativity and add a touch of silver sparkle to your
style!
When you leave class, you will not only have successfully created silver hoop earrings—but you will also
take with you a comprehensive handout, with fully illustrated step-by-step instructions to help you get
started in your home studio, including detailed directions to make a variety of styles of hoop earrings.
If the time and date of the class you want to take is unavailable, please email the teacher at
studiominerock@gmail.com. We will either make room or put you on a waitlist in case another student
can’t make it.
Please, no requests for refunds less than five days before the show, due to the planning needed for travel
and supplies.
NOTE: We provide all the tools and equipment for use in the class, and tools will be available for
purchase if desired, delivered to your home address after the show.

This class will show you to braid wire and add stone to make unique bracelet.
Kit includes enough wire and stones to complete 1 bracelet. There will be several color choices available.
Bring chain nose pliers, flat nose pliers, round nose plier, wire cutter and ruler.

Lets play with Resin today! We will be using both UV Resin and Epoxy (two part) Resin. We have lots of very fun molds to use and metal pendants to make one-of-a-kind jewelry and/or wall decors. Learn the do's and don't, and clean up process. Be ready to be creative with ends options to make fun jewelry and/or wall decors. Some projects will be mailed back since there is a 24-72 time it needs to cure.



IF THE TIME AND DATE OF THE CLASS YOU WANT TO TAKE IS FILLED, "Out of Stock" PLEASE EMAIL US AT:

Jewelry@chicoslittleparadise.com

We will either see if we can make room or put you on a waitlist incase another student can't make it. No Refunds for classes, due to travels & supplies.

This is a great introductory class to the world of soldering. We will be learning about the tools needed to solder, the do and don't and basic skills that will help you advance your soldering. We will use sterling silver wire to make one of the designs above or you will be giving wire to make your own simple design. You will also learn how to set a CZ. We will cover the best way to solder your pieces, making it strong, long lasting, and beautiful. Come join us in this fun soldering class. (Chain not included.)



IF THE TIME AND DATE OF THE CLASS YOU WANT TO TAKE IS FILLED PLEASE EMAIL US AT:

chicoslittleparadise@gmail.com. We will either see if we can make room or put you on a waitlist incase another student can't make it.

No Refunds for classes

Choose a sample from my bead works and I will give you the pattern, kit, and explain it in detail. Materials in kits depend on kit price. Special Notes or requirements: Please, bring work mat, needles (10-12), and favorite thread (6lb and 8lb depend on chosen projects)

Yes, you can make your own silver links!
In this class, you will be guided through the process of creating handmade silver chain links. Using silver
wire, you will create a one to five link chain (up to you), and then attach it to a fine commercial chain,
using techniques demonstrated in class to avoid solder flowing up the chain to stiffen it All steps will be
carefully demonstrated and explained by an experienced and patient teacher.
When you leave class, you will not only have successfully made your first chain necklace—but you will
also take with you a comprehensive handout, with fully illustrated step-by-step instructions to help you
get started in your home studio.
If the time and date of the class you want to take is unavailable, please email the teacher, Vilina Hutter, at
studiominerock@gmail.com. We will either make room or put you on a waitlist in case another student
can’t make it.
Please, no requests for refunds less than three days before the show, due to the planning needed for travel
and supplies.
NOTE: We provide all the tools and equipment for use in the class, and tools will be available for
purchase if desired, to be delivered to your home address after the show.

Each participant will cast one Fine Silver (.999 Silver) pendant using a method that Don Norris perfect 40 years ago using a bundle of pine needles and pour one half ounce of Fine Silver into the “hay stack” of pine needles. The pine needles will act as a mold, molding the Silver into a one-of-a-kind pendant. No two will be the same. They will then search through the needles and find their pine needle casting. Students will be able to cast another one until they get one, they love. After casting, the instructor will solder a Sterling Silver bail onto the casting, making it into a beautiful pendant. Each pendant will be cleaned and tumbled polished. The soldering techniques used were developed by Don Norris over 50 years ago and will be explained by the instructor. The tumble polishing technique will also be taught to the students.

Students will taught how to correctly choose the right size of ring for a finger. Each
student will make 4 stack rings to learn sizing rings, the basics of silver soldering and
polishing. Students can choose to solder a Sterling Silver charm from over hundred
different charms cast by the instructor to solder onto two Sterling Silver rings. They also
learn how to correctly solder pre-notched Sterling Silver heads onto other two rings.
How to set 5mm stones into the heads will be taught before polishing. Students make as
many copper stack rings as time permits for more practice soldering. If you wish to sell
at craft shows or art shows this class and project is a must do for you! These rings are
one of many projects that Don Norris teaches that fall in the category of Sterling Silver
projects that artists can make 50 of them in one day and easily sell them for $30.00 to
$50.00 each, making $20.00 to $40.00 each, or more profit on each one. If just want to
learn and make a great pendant for yourself you will have fun, and learn how to easily
make more projects at home.

Join us in this class to learn the art of setting cabochons. We will be teaching you step by step how build your own custom made cab setting. We'll have selection of stones for you to choose from. Working in sterling and semi-precious stones. Materials will be included.

We advise you to have Torch Soldering experience in the past year or have taken a soldering class before this taking this class.
Reader glasses are recommended

IF THE TIME AND DATE OF THE CLASS YOU WANT TO TAKE IS FILLED PLEASE EMAIL US AT:
chicoslittleparadise@gmail.com
We will either see if we can make room or put you on a waitlist incase another student can't make it.
No Refunds for classes

Choose a sample from my bead works and I will give you the pattern, kit, and explain it in detail. Materials in kits depend on kit price. Special Notes or requirements: Please, bring work mat, needles (10-12), and favorite thread (6lb and 8lb depend on chosen projects)

Choose a sample from my bead works and I will give you the pattern, kit, and explain it in detail. Materials in kits depend on kit price. Special Notes or requirements: Please, bring work mat, needles (10-12), and favorite thread (6lb and 8lb depend on chosen projects)

Learn how to make a stunningly simple and attractive prong setting for a flat-backed stone! Under the
guidance of an experienced and patient teacher, you will learn every step needed from designing the
prongs layout to adding a bail to the finished pendant—no experience necessary!
Skills you will learn in this class include filing, shaping, soldering, polishing, and setting the stone. This
three-hour class will open your eyes to the beauties of prong set cabochons for your collection.
Class fee is $95. All supplies, including your choice of cabochon from a broad selection, will be included
in the kit fee of $65.
When you leave class, you will not only have successfully created your first prong setting—but you will
also take with you a comprehensive handout, with fully illustrated step-by-step instructions to help you
get started in your home studio.
If the time and date of the class you want to take is unavailable, please email the teacher at
studiominerock@gmail.com. We will either make room or put you on a waitlist in case another student
can’t make it.
Please, no requests for refunds less than three days before the show, due to the planning needed for
travel and supplies.
NOTE: We provide all the tools and equipment for use in the class, and discounted tools will be available
for purchase if desired, delivered to your home address after the show.

This class will show you to braid wire and add stone to make unique bracelet.
Kit includes enough wire and stones to complete 1 bracelet. There will be several color choices available.
Bring chain nose pliers, flat nose pliers, round nose plier, wire cutter and ruler.

Have you ever wondered how people wrap stones? In this class you will learn how to wrap one yourself! We will be going over the different wires, stones, and tools to use. In class we will be using plated, 22 gauge, square and half round wire. We will have stones available to pick from in class. Feel free to bring your own, but you might not be able to use it in class because it may be too difficult to use. You will be walking away with a finished project ready to be worn or the knowledge to finish at home.



IF THE TIME AND DATE OF THE CLASS YOU WANT TO TAKE IS FILLED, "Out of Stock" PLEASE EMAIL US AT:

chicoslittleparadise@gmail.com

We will either see if we can make room or put you on a waitlist incase another student can't make it.

No Refunds for classes, due to travels & supplies.

Choose a sample from my bead works and I will give you the pattern, kit, and explain it in detail. Materials in kits depend on kit price. Special Notes or requirements: Please, bring work mat, needles (10-12), and favorite thread (6lb and 8lb depend on chosen projects)

Learn to hammer texture metal, solder, and set a calibrated faceted stone, as you create this beautiful
silver pendant.
Silver soldering is a multi-step process, but under the guidance of an experienced and patient teacher,
you will learn every step as we all create the pendant shown in the illustration—no experience
necessary!
Skills covered in this class include creating a granule, soldering, setting the faceted gem, and polishing
and finishing.
Gem availability may vary—or you can provide your own calibrated 5 mm gem. Cost of the kit with all
the components will be $95, including an 18 inch silver chain.
When you leave class, you will not only have successfully soldered your first piece of wearable art—but
you will also take with you a comprehensive handout, with fully illustrated step-by-step instructions to
help you get started in your home studio.
If the time and date of the class you want to take is unavailable, please email the teacher at
studiominerock@gmail.com. We will either make room or put you on a waitlist in case another student
can’t make it.
Please, no requests for refunds less than five days before the show, due to the planning needed for
travel and supplies.
NOTE: We provide all the tools and equipment for use in the class, and discounted tools will be available
for purchase if desired, delivered to your home address after the show.

A class perfect for accomplished Silversmiths and beginners, that wish to make a
profitable business. You will learn to make four very profitable, very easy, simple and
quick to make projects that will sell fast at craft shows, art galleries, and special events.
So fast, easy and simple that you will learn how to make up, and finish, up to 50 of these
four projects in one day. Even better is that you can still use your creative side to make
each one different enough to keep your interest in making them, and, more
importantly, different enough that your customers will be interested in shopping at your
display. You will be working with Sterling Silver wire and sheet, using simple soldering
techniques that even beginners with no experience can learn during this class. You will,
also, learn how to do the simplest, but the most difficult solder joint used in
Silversmithing, soldering on a bail onto a pendant. Many different bails will be taught.
You will learn that simple does not equate to easy, and complicated is not the most
difficult and the trick to profitable pieces is to make complicated designs quick and easy.
You will learn how to work quickly and use easy techniques to making your projects.
Polishing using a rock tumbler, steel shot and the correct burnishing compound will be
taught as the projects are being polished. Why tumble polishing? You will be taught that
you will be able to polish up to 50 of some of these projects in less than an hour, but
using only about 10 minutes of your time! We will also discuss how, when and where to
sell your finished profitable projects.